DV Mark DV40 (DV40 112/DV40 212) combo by DV Mark
The DV40 112 (1x12”) and 212 (2x12”) are two-channel, 40W all-tube combos, equipped with EL34 power tubes. Get great clean tone on channel 1 and rich tube saturation from channel 2.
Tonal options are almost endless thanks to DV Mark’s patent pending Continuous Power Control (CPC), which allows you to change the power incrementally from the full 40W (class A/B) gradually all the way down to 1W (class A) in pentode mode; or 15W (class A/B) to 0.5W (class A) in triode mode.
Plug into this combo and you’ll immediately hear its quality: very clean sounds even at high volumes, great crunchy rhythm tone, rich saturation, boost switch for lead playing, balanced response in all frequency ranges and impressive bass response—even from the 1x12”!
The range of tonal options is incredible, and it’s easy to find your own sound quickly using EQ and the very practical CPC feature.
The DV40 212's other optional patent pending feature is the Advanced Tube Control System, which allows users to connect the amp to a computer, and—using custom software—collect technical data and tube parameters from the amp.
Power output (CPC):
> pentode: 1 ÷ 40W
> triode: 0.5 ÷ 15W
Preamp tubes: 2 x ECC83
Power tubes: 2 x EL34, 1 x ECC83
Guitarist Australia reviews three DV Mark products
Some excerpts from the Guitarist Australia review:
"[The DV40 112] is one of the most pedal-friendly amps we’ve used."
"If you’ve been put off by neodymes in the past, prepare to be shocked. We ran a bunch of other amps through these cabs and they are serious contenders: proud clean tones and fat, smooth drive tones. They manage to mate readily with 6L6s, EL34s and EL84s…amazing…and their efficiency produced a delightful increase in the output of each amp."
For more information, please visit this products
webpage.